Media.Player

Laser Lighting System Incorporating an Additional Scattered Laser

Technology Benefits

High power from small chip area creating coherent lightFewer devices needed for application, reduces costTrue point source of lightSuperior data transmission speedsImproved color quality

Technology Application

Laser LightingDisplay applications (projectors, televisions, etc.)Direction lighting (car headlights, spot lighting, etc.)Visible light communications

Detailed Technology Description

Researchers at the University of California, Santa Barbara have developed a laser lighting system that uses two (or more) laser sources of different wavelengths to improve the color quality of the light emitted. This invention uses a long wavelength laser that is both less expensive and more reliable than a red phosphor. The produced color has improved rendering and a warmer color temperature. The longer wavelength laser can be scattered by the same phosphor used to create white light to ensure the overall system is safe with uniform color distribution.

Others

Background

Existing laser light systems produce light with a low color rendering index (CRI) or a cool correlated color temperature (CCT), both of which are undesirable. To improve these characteristics, the spectrum of light must be adjusted, which is typically done in industry using phosphors. However, stable red phosphors are very difficult to create, making this quite challenging. Additionally, for laser lighting systems that operate at high power, most red phosphors degrade quickly.

Additional Technologies by these Inventors

• Reduced Dislocation Density of Non-Polar GaN Grown by Hydride Vapor Phase Epitaxy
• Growth of Planar, Non-Polar, A-Plane GaN by Hydride Vapor Phase Epitaxy
• Nonpolar (Al, B, In, Ga)N Quantum Well Design
• Improved Manufacturing of Semiconductor Lasers
• Cleaved Facet Edge-Emitting Laser Diodes Grown on Semipolar GaN
• Enhancing Growth of Semipolar (Al,In,Ga,B)N Films via MOCVD
• GaN-Based Thermoelectric Device for Micro-Power Generation
• Growth of High-Quality, Thick, Non-Polar M-Plane GaN Films
• Method for Growing High-Quality Group III-Nitride Crystals
• Growth of Planar Semi-Polar Gallium Nitride
• Defect Reduction of Non-Polar and Semi-Polar III-Nitrides
• MOCVD Growth of Planar Non-Polar M-Plane Gallium Nitride
• Lateral Growth Method for Defect Reduction of Semipolar Nitride Films
• Low Temperature Deposition of Magnesium Doped Nitride Films
• Growth of Polyhedron-Shaped Gallium Nitride Bulk Crystals
• Improved Manufacturing of Solid State Lasers via Patterning of Photonic Crystals
• Control of Photoelectrochemical (PEC) Etching by Modification of the Local Electrochemical Potential of the Semiconductor Structure
• Phosphor-Free White Light Source
• Single or Multi-Color High Efficiency LED by Growth Over a Patterned Substrate
• High Efficiency LED with Optimized Photonic Crystal Extractor
• Packaging Technique for the Fabrication of Polarized Light Emitting Diodes
• LED Device Structures with Minimized Light Re-Absorption
• (In,Ga,Al)N Optoelectronic Devices with Thicker Active Layers for Improved Performance
• Oxyfluoride Phosphors for Use in White Light LEDs
• III-V Nitride Device Structures on Patterned Substrates
• Growth of Semipolar III-V Nitride Films with Lower Defect Density
• Improved GaN Substrates Prepared with Ammonothermal Growth
• Enhanced Optical Polarization of Nitride LEDs by Increased Indium Incorporation
• Semipolar-Based Yellow, Green, Blue LEDs with Improved Performance
• Hexagonal Wurtzite Type Epitaxial Layer with a Low Alkali-Metal Concentration
• Photoelectrochemical Etching Of P-Type Semiconductor Heterostructures
• Highly Efficient Blue-Violet III-Nitride Semipolar Laser Diodes
• Method for Manufacturing Improved III-Nitride LEDs and Laser Diodes: Monolithic Integration of Optically Pumped and Electrically Injected III-Nitride LEDs
• Defect Reduction in GaN films using in-situ SiNx Nanomask
• Semi-polar LED/LD Devices on Relaxed Template with Misfit Dislocation at Hetero-interface
• Limiting Strain-Relaxation in III-Nitride Heterostructures by Substrate Patterning
• Suppression of Defect Formation and Increase in Critical Thickness by Silicon Doping
• High Efficiency Semipolar AlGaN-Cladding-Free Laser Diodes
• Low-Cost Zinc Oxide for High-Power-Output, GaN-Based LEDs (UC Case 2010-183)
• Low-Cost Zinc Oxide for High-Power-Output, GaN-Based LEDs (UC Case 2010-150)
• Nonpolar III-Nitride LEDs With Long Wavelength Emission
• Method for Increasing GaN Substrate Area in Nitride Devices
• Flexible Arrays of MicroLEDs using the Photoelectrochemical (PEC) Liftoff Technique
• Optimization of Laser Bar Orientation for Nonpolar Laser Diodes
• UV Optoelectronic Devices Based on Nonpolar and Semi-polar AlInN and AlInGaN Alloys
• Low-Droop LED Structure on GaN Semi-polar Substrates
• Improved Fabrication of Nonpolar InGaN Thin Films, Heterostructures, and Devices
• Growth of High-Performance M-plane GaN Optical Devices
• Method for Enhancing Growth of Semipolar Nitride Devices
• Transparent Mirrorless (TML) LEDs
• Solid Solution Phosphors for Use in Solid State White Lighting Applications
• Technique for the Nitride Growth of Semipolar Thin Films, Heterostructures, and Semiconductor Devices
• Planar, Nonpolar M-Plane III-Nitride Films Grown on Miscut Substrates
• High-Efficiency, Mirrorless Non-Polar and Semi-Polar Light Emitting Devices
• High Light Extraction Efficiency III-Nitride LED
• Tunable White Light Based on Polarization-Sensitive LEDs
• Method for Improved Surface of (Ga,Al,In,B)N Films on Nonpolar or Semipolar Subtrates
• Improved Anisotropic Strain Control in Semipolar Nitride Devices
• III-Nitride Tunnel Junction with Modified Interface
• Enhanced Light Extraction LED with a Tunnel Junction Contact Wafer Bonded to a Conductive Oxide
• Increased Light Extraction with Multistep Deposition of ZnO on GaN
• Hybrid Growth Method for Improved III-Nitride Tunnel Junction Devices
• Contact Architectures for Tunnel Junction Devices
• New Blue Phosphor for High Heat Applications
• Internal Heating for Ammonothermal Growth of Group-III Nitride Crystals
• Methods for Fabricating III-Nitride Tunnel Junction Devices
• Multifaceted III-Nitride Surface-Emitting Laser
• Laser Diode System For Horticultural Lighting
• Fabricating Nitride Layers
• Reduction in Leakage Current and Increase in Efficiency of III-Nitride MicroLEDS
• Vertical Cavity Surface-Emitting Lasers with Continuous Wave Operation

Tech ID/UC Case

29305/2018-416-0

Related Cases

2018-416-0

*Abstract

A laser lighting system that uses a long wavelength laser that is both less expensive and more reliable when compared to red phosphors.

*Applications

• Laser Lighting
• Display applications (projectors, televisions, etc.)
• Direction lighting (car headlights, spot lighting, etc.)
• Visible light communications

*Principal Investigator

Name: Daniel Becerra

Department:

Name: Steven DenBaars

Department:

Name: Shuji Nakamura

Department:

Country/Region

USA