Self-Calibrating Automatic Controller To Determine The End Of Cycle In Clothes Dryers
Long-term accuracy and functionality Simple and inexpensive Saves Energy Improves performance
Gas and electric dryers
There are two types of existing dryer sensors used to determine dryer cycle endpoint. One method uses a single temperature sensor on the exhaust outlet. Unfortunately, exhaust temperatures are not necessarily a good indication of dryness because exhaust temperatures are greatly affected by the inlet air temperatures, which may vary widely for dryers located in unconditioned spaces such as garages. Furthermore, accuracy of the temperature sensor may drift with time. The second method utilizes moisture sensors located inside the dryer drum. Unfortunately these sensors may lose accuracy with time as they are exposed to water and fabric softener. Furthermore, even a functional sensor may work inaccurately for mixed loads, where heavier fabrics may still be wet but the sensor detects dry materials on the perimeter of the load. Researcher at the University of California, Davis has developed a novel controller that monitors the differential temperature of the dryer exhaust air compared to the heated inlet air to determine when the moisture has been removed from the contents. When the load is dry, this differential reading is near zero (because moisture cools the exhaust air). This novel controller self-calibrates to ensure long-term accuracy and is not dependent on factors such as air inlet temperature, load characteristics, and drift of the sensors over time.
Additional Technologies by these Inventors Tech ID/UC Case 24482/2014-692-0 Related Cases 2014-692-0
USA
