A Simple, Area-Efficient Ripple-Rejection Technique for Chopped Bio-Signal Amplifiers
- Technology Benefits
- Saves chip area to allow/maintain device miniaturization.Ripple-rejection technology consumes no additional power by utilizing a passive design.Design is considerably simpler than current state-of-the-art devices.
- Technology Application
- Amplifiers in electroencephalograms (EEGs) used to measure brain activity.Amplifiers in electrocardiograms to test electrical activity of the heart.
- Detailed Technology Description
- The Markovic group at UCLA has developed a chopped bio-signal amplification technique with reduced output noise compared to current technologies. This technology is relevant to measuring biologically relevant neuro and cardiac signals, many of which span a narrow frequency band between 1- 100 Hz with relatively low signal intensities. The challenge with signal amplification is the minimization of flicker and thermal noise that may obscure the original input signal. Chopping in amplifiers is commonly used to reduce amplification associated noise but creates a large noise ripple at output. Active methods to reduce this ripple have traditionally employed the use of active stages and switching circuitry resulting in unwanted phase delay, power consumption, and increased device size. The Markovic group improves upon these areas with a simple design using passive components that has been shown in simulation to attenuate the output ripple by as much as 78 dB without affecting signal gain, performance, or device size.
- Application No.
- 20170230019
- Others
-
State Of Development
Design has been successfully tested in simulations. Background
Monitoring electrophysiological signals in relation to health and disease has been instrumental to the understanding of biological systems and patient healthcare. These measurements are especially critical in the fields of neurological and cardiac science. Because so many bioelectrical readings of interest from the brain and heart are generally low in intensity, signal amplification is necessary prior to digitization and output. However, input amplification inherently generates additional sources of noise which makes accurate interpretation of bioelectrical signals with low frequency bands and amplitudes challenging. Therefore, advances in detection sensitivity and accuracy typically coincide with technological advances in signal amplifiers that minimize extraneous background noise. Related Materials
Additional Technologies by these Inventors
- Saturation-Tolerant Electrophysiological Recording Interface
- Scalable Parameterized VLSI Architecture for Compressive Sensing Sparse Approximation
- Autonomous Thermoelectric Energy-Harvesting Platform for Biomedical Sensors
- A High Dynamic-Range Sensing Front-End For Neural Signal Recording Systems
- Load Adaptive, Reconfigurable Active Rectifier for Multiple Input Multple Output (MIMO) Implant Power Management
- Electrode Agnostic, Supply Variant Stimulation Engine For Implantable Neural Stimulation
- A Distance-Immune Low-Power Inductively-Coupled Bidirectional Data Link
Tech ID/UC Case
24998/2015-164-0
Related Cases
2015-164-0
- *Abstract
-
The Markovic group at UCLA has designed a chopping amplification technique with passive ripple-rejection that improves on the state-of-the-art in monitoring electrophysiological signals.
- *Applications
-
- Amplifiers in electroencephalograms (EEGs) used to measure brain activity.
- Amplifiers in electrocardiograms to test electrical activity of the heart.
- *IP Issue Date
- Aug 10, 2017
- *Principal Investigator
-
Name: Hariprasad Chandrakumar
Department:
Name: Dejan Markovic
Department:
- Country/Region
- USA
For more information, please click Here
