Equipment for improving the quality of standing water of outdoor tanks (Lighting lens)
|
|
|
The task of the technical solution is to create a facility to improve the quality of standing water of outdoor reservoirs, which would eliminate deficiencies and which would allow effective cleaning of the water level growth by water plants.The problem with sedimentation tanks of wastewater treatment plants, biological ponds or village ponds is the ingrown water level by floating plants. This results in the formation of water levels and the reduction of photosynthesis of oxygen deficiency in water and the formation of anaerobic processes.
The advantages of equipment to improve the quality of standing water of outdoor tanks lie in very cheap, energy-efficient and self-cleaning of water tanks, solving oxygen deficits under heavily overgrown water levels.
The equipment to improve the quality of standing water according to the submitted technical solution climbs used for finishing ponds and for all outdoor water reservoirs, the level of which suffers from the growth of floating aquatic plants.
This task is solved by creating equipment to improve the quality of standing water of outdoor water reservoirs, especially ponds or sedimentation tanks with rising water levels. The essence of the device is that it is made up of a floating body of translucent material, where the volume density of the body as a whole is less than the volume density of the water. The body floats freely on the surface and illuminates the water column below. At least one side of the body has a convex shape so that dirt does not stick to the body and reduces its ability to release light. The maximum dimension of the body in a horizontal direction is at least twice the maximum size of the body in the vertical direction. The body has a flattened shape in the side cut, it is not a ball or a box, which increases its stability on the surface of the water and reduces its volume. The body is basically the shape of a lens. This is advantageous not only for the refraction of light, but mainly so that dirt does not stick to the surface of the body and the surface of the body does not become so polluted, which would cause a worse penetration of the light. In addition, the body rises above the surface and above all exceeds the leaves of aquatic plants, which cannot overshadow it. The degree of flattening of the body depends on the type of increase in the water level. E.g. in the place of plants with higher leaves the size of the body in a vertical direction is greater.
Licencing
08/11/2020 00:00:00
CZ Patent 305945
捷克共和國
