Hexagonal Wurtzite Type Epitaxial Layer with a Low Alkali-Metal Concentration
- 技術優勢
- Low alkali-metal diffusionImproved device performance
- 技術應用
- LEDs and Laser DiodesHigh Electron Mobility Transistors (HEMTs)Power switching devices
- 詳細技術說明
- Researchers at the University of California, Santa Barbara have developed a method to produce hexagonal würtzite type epitaxial layers possessing low alkali-metal concentration. While incorporation of alkali-metals is essential to the growth process, they have a negative impact on device properties. We have found that the diffusion of alkali-metals into the epitaxial layer strongly depends on the crystal plane of the substrate and therefore can be effectively suppressed. This method produces bow-free GaN substrates containing low structural defect densities in a cost effective manner, allowing manufacturers of both devices and substrates to benefit.
- *Abstract
-
A method to produce hexagonal würtzite type epitaxial layers possessing low alkali-metal concentration.
- *IP Issue Date
- Feb 11, 2014
- *Principal Investigation
-
Name: Steven DenBaars
Department:
Name: Derrick Kamber
Department:
Name: Makoto Saito
Department:
Name: James Speck
Department:
Name: Shinichiro Kawabata
Department:
Name: Shuji Nakamura
Department:
- 申請號碼
- 8647967
- 其他
-
Background
A high-quality substrate is essential for fabrication of GaN devices, which has led to various approaches for growing GaN single crystal substrates. In most approaches, alkali-metals are added to the growth system, causing the grown GaN crystals to contain high concentrations of alkali-metals. This high concentration of alkali metals severely increases the likelihood that alkali-metals will diffuse into the epitaxial layers, having a negative impact on the electrical properties and performance of devices. Additional Technologies by these Inventors
- Reduced Dislocation Density of Non-Polar GaN Grown by Hydride Vapor Phase Epitaxy
- Growth of Planar, Non-Polar, A-Plane GaN by Hydride Vapor Phase Epitaxy
- Nonpolar (Al, B, In, Ga)N Quantum Well Design
- Improved Manufacturing of Semiconductor Lasers
- Cleaved Facet Edge-Emitting Laser Diodes Grown on Semipolar GaN
- Etching Technique for the Fabrication of Thin (Al, In, Ga)N Layers
- Enhancing Growth of Semipolar (Al,In,Ga,B)N Films via MOCVD
- GaN-Based Thermoelectric Device for Micro-Power Generation
- Growth of High-Quality, Thick, Non-Polar M-Plane GaN Films
- Method for Growing High-Quality Group III-Nitride Crystals
- Growth of Planar Semi-Polar Gallium Nitride
- Defect Reduction of Non-Polar and Semi-Polar III-Nitrides
- MOCVD Growth of Planar Non-Polar M-Plane Gallium Nitride
- Lateral Growth Method for Defect Reduction of Semipolar Nitride Films
- Low Temperature Deposition of Magnesium Doped Nitride Films
- Growth of Polyhedron-Shaped Gallium Nitride Bulk Crystals
- Improved Manufacturing of Solid State Lasers via Patterning of Photonic Crystals
- Control of Photoelectrochemical (PEC) Etching by Modification of the Local Electrochemical Potential of the Semiconductor Structure
- Phosphor-Free White Light Source
- Single or Multi-Color High Efficiency LED by Growth Over a Patterned Substrate
- High Efficiency LED with Optimized Photonic Crystal Extractor
- Packaging Technique for the Fabrication of Polarized Light Emitting Diodes
- LED Device Structures with Minimized Light Re-Absorption
- (In,Ga,Al)N Optoelectronic Devices with Thicker Active Layers for Improved Performance
- Oxyfluoride Phosphors for Use in White Light LEDs
- III-V Nitride Device Structures on Patterned Substrates
- Growth of Semipolar III-V Nitride Films with Lower Defect Density
- Improved GaN Substrates Prepared with Ammonothermal Growth
- Enhanced Optical Polarization of Nitride LEDs by Increased Indium Incorporation
- Semipolar-Based Yellow, Green, Blue LEDs with Improved Performance
- Photoelectrochemical Etching Of P-Type Semiconductor Heterostructures
- Photoelectrochemical Etching for Chip Shaping Of LEDs
- Highly Efficient Blue-Violet III-Nitride Semipolar Laser Diodes
- Method for Manufacturing Improved III-Nitride LEDs and Laser Diodes: Monolithic Integration of Optically Pumped and Electrically Injected III-Nitride LEDs
- Defect Reduction in GaN films using in-situ SiNx Nanomask
- Semi-polar LED/LD Devices on Relaxed Template with Misfit Dislocation at Hetero-interface
- Limiting Strain-Relaxation in III-Nitride Heterostructures by Substrate Patterning
- Suppression of Defect Formation and Increase in Critical Thickness by Silicon Doping
- High Efficiency Semipolar AlGaN-Cladding-Free Laser Diodes
- Low-Cost Zinc Oxide for High-Power-Output, GaN-Based LEDs (UC Case 2010-183)
- Low-Cost Zinc Oxide for High-Power-Output, GaN-Based LEDs (UC Case 2010-150)
- Nonpolar III-Nitride LEDs With Long Wavelength Emission
- Method for Growing Self-Assembled Quantum Dot Lattices
- Method for Increasing GaN Substrate Area in Nitride Devices
- Flexible Arrays of MicroLEDs using the Photoelectrochemical (PEC) Liftoff Technique
- Optimization of Laser Bar Orientation for Nonpolar Laser Diodes
- UV Optoelectronic Devices Based on Nonpolar and Semi-polar AlInN and AlInGaN Alloys
- Low-Droop LED Structure on GaN Semi-polar Substrates
- Improved Fabrication of Nonpolar InGaN Thin Films, Heterostructures, and Devices
- Growth of High-Performance M-plane GaN Optical Devices
- Method for Enhancing Growth of Semipolar Nitride Devices
- Transparent Mirrorless (TML) LEDs
- Solid Solution Phosphors for Use in Solid State White Lighting Applications
- Technique for the Nitride Growth of Semipolar Thin Films, Heterostructures, and Semiconductor Devices
- Planar, Nonpolar M-Plane III-Nitride Films Grown on Miscut Substrates
- High-Efficiency, Mirrorless Non-Polar and Semi-Polar Light Emitting Devices
- High Light Extraction Efficiency III-Nitride LED
- Tunable White Light Based on Polarization-Sensitive LEDs
- Method for Improved Surface of (Ga,Al,In,B)N Films on Nonpolar or Semipolar Subtrates
- Improved Anisotropic Strain Control in Semipolar Nitride Devices
- III-Nitride Tunnel Junction with Modified Interface
- Enhanced Light Extraction LED with a Tunnel Junction Contact Wafer Bonded to a Conductive Oxide
- Increased Light Extraction with Multistep Deposition of ZnO on GaN
- Hybrid Growth Method for Improved III-Nitride Tunnel Junction Devices
- Calcium Impurity Reduction for Improved Light-Emitting Devices
- Contact Architectures for Tunnel Junction Devices
- New Blue Phosphor for High Heat Applications
- Internal Heating for Ammonothermal Growth of Group-III Nitride Crystals
- Methods for Fabricating III-Nitride Tunnel Junction Devices
- Multifaceted III-Nitride Surface-Emitting Laser
- Laser Diode System For Horticultural Lighting
- Fabricating Nitride Layers
- Reduction in Leakage Current and Increase in Efficiency of III-Nitride MicroLEDS
- Vertical Cavity Surface-Emitting Lasers with Continuous Wave Operation
- Laser Lighting System Incorporating an Additional Scattered Laser
Tech ID/UC Case
23657/2008-658-0
Related Cases
2008-658-0
- 國家/地區
- 美國
欲了解更多信息，請點擊 這裡
