III-Nitride Tunnel Junction with Modified Interface
- 技術優勢
- Improved device performance due to decreased operating voltage of devicesElimination of a need for a TCO or silver mirrorSimpler manufacturing process due to fewer processing stepsAbility to incorporate multiple active regions into a single device
- 技術應用
- LEDsEdge emitting laser diodesVertical cavity surface emitting lasers (VCSELs)Solar cells
- 詳細技術說明
- Researchers at UC Santa Barbara have developed a method for improving the performance of semipolar III-nitride light-emitting devices. This method involves modification of the very highly doped (n+/p+) interface to reduce the energy barrier associated with tunneling and increase the tunneling current. The modification involves introducing extra charge carriers, such as dopant atoms, or impurities that results in electronic trap states that enhance tunneling.
- *Abstract
-
A method for improving the performance of semipolar III-nitride light-emitting devices.
- *Principal Investigation
-
Name: Steven DenBaars
Department:
Name: John Leonard
Department:
Name: Tal Margalith
Department:
Name: Shuji Nakamura
Department:
Name: James Speck
Department:
Name: Benjamin Yonkee
Department:
Name: Erin Young
Department:
- 其他
-
Background
Current commercially available III-nitride light-emitting diodes (LEDs) and edge emitting laser diodes use an active region in a biased p-n junction to allow for electron and hole injection. The p-GaN is difficult to contact electrically and has low hole concentration and mobility. This means that p-GaN cannot be used as a current spreading layer and that traditional p-contacts will add significant voltage to devices. Despite these inherent problems, all commercial light-emitting devices utilize a p-contact and a material other than p-GaN for current spreading, typically transparent conducting oxides (TCO).
Additional Technologies by these Inventors
- Reduced Dislocation Density of Non-Polar GaN Grown by Hydride Vapor Phase Epitaxy
- Growth of Planar, Non-Polar, A-Plane GaN by Hydride Vapor Phase Epitaxy
- Nonpolar (Al, B, In, Ga)N Quantum Well Design
- Improved Manufacturing of Semiconductor Lasers
- Cleaved Facet Edge-Emitting Laser Diodes Grown on Semipolar GaN
- Etching Technique for the Fabrication of Thin (Al, In, Ga)N Layers
- Enhancing Growth of Semipolar (Al,In,Ga,B)N Films via MOCVD
- GaN-Based Thermoelectric Device for Micro-Power Generation
- Growth of High-Quality, Thick, Non-Polar M-Plane GaN Films
- Method for Growing High-Quality Group III-Nitride Crystals
- Growth of Planar Semi-Polar Gallium Nitride
- Defect Reduction of Non-Polar and Semi-Polar III-Nitrides
- MOCVD Growth of Planar Non-Polar M-Plane Gallium Nitride
- Lateral Growth Method for Defect Reduction of Semipolar Nitride Films
- Low Temperature Deposition of Magnesium Doped Nitride Films
- Growth of Polyhedron-Shaped Gallium Nitride Bulk Crystals
- Improved Manufacturing of Solid State Lasers via Patterning of Photonic Crystals
- Control of Photoelectrochemical (PEC) Etching by Modification of the Local Electrochemical Potential of the Semiconductor Structure
- Phosphor-Free White Light Source
- Single or Multi-Color High Efficiency LED by Growth Over a Patterned Substrate
- High Efficiency LED with Optimized Photonic Crystal Extractor
- Packaging Technique for the Fabrication of Polarized Light Emitting Diodes
- LED Device Structures with Minimized Light Re-Absorption
- (In,Ga,Al)N Optoelectronic Devices with Thicker Active Layers for Improved Performance
- Oxyfluoride Phosphors for Use in White Light LEDs
- III-V Nitride Device Structures on Patterned Substrates
- Growth of Semipolar III-V Nitride Films with Lower Defect Density
- Improved GaN Substrates Prepared with Ammonothermal Growth
- Enhanced Optical Polarization of Nitride LEDs by Increased Indium Incorporation
- Semipolar-Based Yellow, Green, Blue LEDs with Improved Performance
- Hexagonal Wurtzite Type Epitaxial Layer with a Low Alkali-Metal Concentration
- Photoelectrochemical Etching Of P-Type Semiconductor Heterostructures
- Photoelectrochemical Etching for Chip Shaping Of LEDs
- Highly Efficient Blue-Violet III-Nitride Semipolar Laser Diodes
- Method for Manufacturing Improved III-Nitride LEDs and Laser Diodes: Monolithic Integration of Optically Pumped and Electrically Injected III-Nitride LEDs
- Defect Reduction in GaN films using in-situ SiNx Nanomask
- Semi-polar LED/LD Devices on Relaxed Template with Misfit Dislocation at Hetero-interface
- Limiting Strain-Relaxation in III-Nitride Heterostructures by Substrate Patterning
- Suppression of Defect Formation and Increase in Critical Thickness by Silicon Doping
- High Efficiency Semipolar AlGaN-Cladding-Free Laser Diodes
- Low-Cost Zinc Oxide for High-Power-Output, GaN-Based LEDs (UC Case 2010-183)
- Low-Cost Zinc Oxide for High-Power-Output, GaN-Based LEDs (UC Case 2010-150)
- Nonpolar III-Nitride LEDs With Long Wavelength Emission
- Method for Growing Self-Assembled Quantum Dot Lattices
- Method for Increasing GaN Substrate Area in Nitride Devices
- Flexible Arrays of MicroLEDs using the Photoelectrochemical (PEC) Liftoff Technique
- Optimization of Laser Bar Orientation for Nonpolar Laser Diodes
- UV Optoelectronic Devices Based on Nonpolar and Semi-polar AlInN and AlInGaN Alloys
- Low-Droop LED Structure on GaN Semi-polar Substrates
- Improved Fabrication of Nonpolar InGaN Thin Films, Heterostructures, and Devices
- Growth of High-Performance M-plane GaN Optical Devices
- Method for Enhancing Growth of Semipolar Nitride Devices
- Transparent Mirrorless (TML) LEDs
- Solid Solution Phosphors for Use in Solid State White Lighting Applications
- Technique for the Nitride Growth of Semipolar Thin Films, Heterostructures, and Semiconductor Devices
- Planar, Nonpolar M-Plane III-Nitride Films Grown on Miscut Substrates
- High-Efficiency, Mirrorless Non-Polar and Semi-Polar Light Emitting Devices
- High Light Extraction Efficiency III-Nitride LED
- Tunable White Light Based on Polarization-Sensitive LEDs
- Method for Improved Surface of (Ga,Al,In,B)N Films on Nonpolar or Semipolar Subtrates
- Improved Anisotropic Strain Control in Semipolar Nitride Devices
- Enhanced Light Extraction LED with a Tunnel Junction Contact Wafer Bonded to a Conductive Oxide
- Increased Light Extraction with Multistep Deposition of ZnO on GaN
- Hybrid Growth Method for Improved III-Nitride Tunnel Junction Devices
- Calcium Impurity Reduction for Improved Light-Emitting Devices
- Contact Architectures for Tunnel Junction Devices
- New Blue Phosphor for High Heat Applications
- Internal Heating for Ammonothermal Growth of Group-III Nitride Crystals
- Methods for Fabricating III-Nitride Tunnel Junction Devices
- Colorimetric Sensing Of Amines
- Multifaceted III-Nitride Surface-Emitting Laser
- Laser Diode System For Horticultural Lighting
- Fabricating Nitride Layers
- Reduction in Leakage Current and Increase in Efficiency of III-Nitride MicroLEDS
- Vertical Cavity Surface-Emitting Lasers with Continuous Wave Operation
- Laser Lighting System Incorporating an Additional Scattered Laser
Tech ID/UC Case
25740/2016-245-0
Related Cases
2016-245-0
- 國家/地區
- 美國
欲了解更多信息，請點擊 這裡
