Media.Player

Planar, Nonpolar M-Plane III-Nitride Films Grown on Miscut Substrates

技術優勢

Ability to control the crystal miscut direction and angle, leading to extra smooth surfaces and high quality device structures Enhanced step-flow growth mode via a miscut substrate suppresses defect formation and propagation Growth window of m-plane GaN is enlarged, leading to higher yield in manufacturing

技術應用

LEDs Laser diodes (LDs)

詳細技術說明

Researchers at UC Santa Barbara have created a method for growing planar nonpolar III-nitride films that have atomically smooth surfaces without any macroscopic surface undulations. This is achieved by selecting a miscut angle of substrate upon which the nonpolar III-nitride films are grown in order to suppress the surface undulations of the films. Without macroscopic surface undulations, films provide better device layers, templates, or substrates for device growth. The invention is relevant to all nonpolar planar films of nitrides, regardless of whether they are homoepitaxial or heteroepitaxial.

*Abstract

A method for growing planar nonpolar III-nitride films that have atomically smooth surfaces without any macroscopic surface undulations. 

*IP Issue Date

Nov 16, 2017

*Principal Investigation

Name: Steven DenBaars

Department:

Name: Asako Hirai

Department:

Name: Kenji Iso

Department:

Name: Shuji Nakamura

Department:

Name: Makoto Saito

Department:

Name: James Speck

Department:

Name: Hisashi Yamada

Department:

申請號碼

20170327969

其他

Background

The usefulness of gallium nitride (GaN) and its ternary and quaternary compounds incorporating aluminum and indium has been well established for fabrication of visible and ultraviolet optoelectronic devices and high-power electronic devices. Current nitride technology for these devices uses nitride films grown along the polar c-direction; however, these devices suffer from the quantum-confined Stark effect (QCSE). One way to combat the issue is to grow films on nonpolar planes of GaN in order to reduce polarization effects and the resulting decreases in device performance. While many films grown along a nonpolar direction have seen improved device performance, macroscopic surface undulations typically exist on their surfaces, which is harmful to successive film growth.   

Additional Technologies by these Inventors

• Reduced Dislocation Density of Non-Polar GaN Grown by Hydride Vapor Phase Epitaxy
• Growth of Planar, Non-Polar, A-Plane GaN by Hydride Vapor Phase Epitaxy
• Nonpolar (Al, B, In, Ga)N Quantum Well Design
• Improved Manufacturing of Semiconductor Lasers
• Cleaved Facet Edge-Emitting Laser Diodes Grown on Semipolar GaN
• Etching Technique for the Fabrication of Thin (Al, In, Ga)N Layers
• Enhancing Growth of Semipolar (Al,In,Ga,B)N Films via MOCVD
• GaN-Based Thermoelectric Device for Micro-Power Generation
• Growth of High-Quality, Thick, Non-Polar M-Plane GaN Films
• Method for Growing High-Quality Group III-Nitride Crystals
• Growth of Planar Semi-Polar Gallium Nitride
• Defect Reduction of Non-Polar and Semi-Polar III-Nitrides
• MOCVD Growth of Planar Non-Polar M-Plane Gallium Nitride
• Lateral Growth Method for Defect Reduction of Semipolar Nitride Films
• Low Temperature Deposition of Magnesium Doped Nitride Films
• Growth of Polyhedron-Shaped Gallium Nitride Bulk Crystals
• Improved Manufacturing of Solid State Lasers via Patterning of Photonic Crystals
• Control of Photoelectrochemical (PEC) Etching by Modification of the Local Electrochemical Potential of the Semiconductor Structure
• Phosphor-Free White Light Source
• Single or Multi-Color High Efficiency LED by Growth Over a Patterned Substrate
• High Efficiency LED with Optimized Photonic Crystal Extractor
• Packaging Technique for the Fabrication of Polarized Light Emitting Diodes
• LED Device Structures with Minimized Light Re-Absorption
• (In,Ga,Al)N Optoelectronic Devices with Thicker Active Layers for Improved Performance
• Oxyfluoride Phosphors for Use in White Light LEDs
• III-V Nitride Device Structures on Patterned Substrates
• Growth of Semipolar III-V Nitride Films with Lower Defect Density
• Improved GaN Substrates Prepared with Ammonothermal Growth
• Enhanced Optical Polarization of Nitride LEDs by Increased Indium Incorporation
• Semipolar-Based Yellow, Green, Blue LEDs with Improved Performance
• Hexagonal Wurtzite Type Epitaxial Layer with a Low Alkali-Metal Concentration
• Photoelectrochemical Etching Of P-Type Semiconductor Heterostructures
• Photoelectrochemical Etching for Chip Shaping Of LEDs
• Highly Efficient Blue-Violet III-Nitride Semipolar Laser Diodes
• Method for Manufacturing Improved III-Nitride LEDs and Laser Diodes: Monolithic Integration of Optically Pumped and Electrically Injected III-Nitride LEDs
• Defect Reduction in GaN films using in-situ SiNx Nanomask
• Semi-polar LED/LD Devices on Relaxed Template with Misfit Dislocation at Hetero-interface
• Limiting Strain-Relaxation in III-Nitride Heterostructures by Substrate Patterning
• Suppression of Defect Formation and Increase in Critical Thickness by Silicon Doping
• High Efficiency Semipolar AlGaN-Cladding-Free Laser Diodes
• Low-Cost Zinc Oxide for High-Power-Output, GaN-Based LEDs (UC Case 2010-183)
• Low-Cost Zinc Oxide for High-Power-Output, GaN-Based LEDs (UC Case 2010-150)
• Nonpolar III-Nitride LEDs With Long Wavelength Emission
• Method for Growing Self-Assembled Quantum Dot Lattices
• Method for Increasing GaN Substrate Area in Nitride Devices
• Flexible Arrays of MicroLEDs using the Photoelectrochemical (PEC) Liftoff Technique
• Optimization of Laser Bar Orientation for Nonpolar Laser Diodes
• UV Optoelectronic Devices Based on Nonpolar and Semi-polar AlInN and AlInGaN Alloys
• Low-Droop LED Structure on GaN Semi-polar Substrates
• Improved Fabrication of Nonpolar InGaN Thin Films, Heterostructures, and Devices
• Growth of High-Performance M-plane GaN Optical Devices
• Method for Enhancing Growth of Semipolar Nitride Devices
• Transparent Mirrorless (TML) LEDs
• Solid Solution Phosphors for Use in Solid State White Lighting Applications
• Technique for the Nitride Growth of Semipolar Thin Films, Heterostructures, and Semiconductor Devices
• High-Efficiency, Mirrorless Non-Polar and Semi-Polar Light Emitting Devices
• High Light Extraction Efficiency III-Nitride LED
• Tunable White Light Based on Polarization-Sensitive LEDs
• Method for Improved Surface of (Ga,Al,In,B)N Films on Nonpolar or Semipolar Subtrates
• Improved Anisotropic Strain Control in Semipolar Nitride Devices
• III-Nitride Tunnel Junction with Modified Interface
• Enhanced Light Extraction LED with a Tunnel Junction Contact Wafer Bonded to a Conductive Oxide
• Increased Light Extraction with Multistep Deposition of ZnO on GaN
• Hybrid Growth Method for Improved III-Nitride Tunnel Junction Devices
• Calcium Impurity Reduction for Improved Light-Emitting Devices
• Contact Architectures for Tunnel Junction Devices
• New Blue Phosphor for High Heat Applications
• Internal Heating for Ammonothermal Growth of Group-III Nitride Crystals
• Methods for Fabricating III-Nitride Tunnel Junction Devices
• Multifaceted III-Nitride Surface-Emitting Laser
• Laser Diode System For Horticultural Lighting
• Fabricating Nitride Layers
• Reduction in Leakage Current and Increase in Efficiency of III-Nitride MicroLEDS
• Vertical Cavity Surface-Emitting Lasers with Continuous Wave Operation
• Laser Lighting System Incorporating an Additional Scattered Laser

Tech ID/UC Case

25248/2008-004-0

Related Cases

2008-004-0

國家/地區

美國