Media.Player

Low-Profile Circularly-Polarized Single-Probe Broadband Antenna

技术优势

Size of the antenna is shrunk by half compared to previous E-shaped CP patch antennaPerformance parameters such as AR bandwidth and impedance are substantially improved compared to commercial single-feed CP patch antennasThe single-probe design facilitates low-cost fabrications

技术应用

The technology is ideal for wideband applications requiring circular polarizations, such as in satellite communication products (GPS, Radio-frequency identification, and direct broadcast satellite television)The compact size of this new antenna design could also be useful for linear or even planar arrays in high-gain satellite antennas

详细技术说明

UCLA researchers from the department of electrical engineering have developed a new technology to fabricate CP patch antenna with compact size and decent performance. By fine-tuning the geometry of a half-E shaped patch antenna and utilizing an electrically thick substrate, a substantial size reduction of 50% is achieved compared to the original E-shaped CP patch antenna, while a satisfactory AR-S11 bandwidth of 5.3% can be retained.

*Abstract

UCLA researchers from the Department of Electrical Engineering have developed a new technology to enable single-layer single-probe circularly-polarized patch antennas with a compact size and broad axial ratio/impedance matching bandwidth.

*Applications

• The technology is ideal for wideband applications requiring circular polarizations, such as in satellite communication products (GPS, Radio-frequency identification, and direct broadcast satellite television)
• The compact size of this new antenna design could also be useful for linear or even planar arrays in high-gain satellite antennas

*IP Issue Date

Jan 26, 2017

*Principal Investigation

Name: Joshua Kovitz

Department:

Name: Yahya Rahmat-Samii

Department:

Name: Harish Rajagopalan

Department:

Name: Jean Paul Santos

Department:

申请号码

20170025762

其他

State Of Development

A prototype operating over the WLAN band ( 2.4-2.53 GHz) has been developed to demonstrate the design of low-profile circularly-polarized single-probe broadband antenna for radiofrequency communication. The prototype showed a good bandwidth (5.3%, AR ≤ 3 dB and S₁₁ ≤ -10 dB) with a height of roughly λ/10, along with a predominantly unidirectional radiation pattern towards the broadside direction (theta=0).

Background

Patch antennas are attractive due to their low profile, easy fabrication and polarization versatility; however, the design of a compact, broadband, circularly polarized (CP) patch antenna still remains a significant challenge. Most existing low-profile CP dual-band or wideband antennas require multilayer fabrication, multiple input feeds or complex fabrication processing, raising the overall antenna cost. In addition, typical single-probe CP patch antennas have axial ratio (AR)/impedance (S₁₁)-matching bandwidths less than 1-2%, limiting their efficiency. Although a single-probe CP E-shaped patch antenna had been designed to achieve a 9% AR-S₁₁ bandwidth, the antenna’s large size limits its wide application.

Related Materials

Joshua M. Kovitz, Jean Paul Santos, and Yahya Rahmat-Samii. The CP Half E-shaped Patch: Evolving from Linear Polarization to Compact Single Feed Circularly Polarized Antennas. IEEE International Symposium on Antennas and Propagation, 2015.

Additional Technologies by these Inventors

• Hemispherical Rectenna Arrays for Multi-Directional, Multi-Polarization, and Multi-Band Ambient RF Energy Harvesting
• Multi-Layer Electro-Textile MRI RF Coil Array

Tech ID/UC Case

25538/2015-888-0

Related Cases

2015-888-0

国家/地区

美国