Media.Player

Improving FPGA Technology Mapping and Routing, and Sequential Circuit Retiming by Logic Rewiring Operations

总结

In this application, we propose strategies for using a so-called Rewiring technique for the following VLSI Electronic Design Automation (EDA or CAD) operations: FPGA Technology Mapping and Routing, and Sequential Circuit Retiming. Rewiring is a logic perturbation technique that replaces a signal wire/gate with other wires/gates without changing the logic function of a circuit. It appeals like some new signal wire/gate is added to replace some old signal wire/gate, which can be served as a circuit transformation process. In today’s VLSI chips, because of the continual scaling down on transistor sizes, the wiring delay has become a much dominating factor than gate delay and often becomes a chip’s performance bottle neck. Due to its unique capability of applying logic transformation upon spotted or targeted wires, a wire-targeting capability, the Rewiring logic transformation technique can gain much higher timing accuracy and control then the old gate-based circuit transformation techniques. One unique property of an FPGA chip is that any logic perturbation inside its Look-Up-Tables (LUTs) is totally area/delay-free. Here we propose to apply the following rewiring strategies (among others) for the optimization of FPGA Technology Mapping and Routing: (1) Replacing LUT-external wires by (resource free) LUT-internal wires, (2) Replacing longer external wires by shorter external wires, (3) Replacing wires in routing crowded area by wires in less crowded area, (4) Replacing delay-critical wires by none delay-critical wires, (5) Replacing wires with larger area-flow by wires with smaller area-flow, etc. For the Sequential Circuit Retiming, we propose the following rewiring strategies: (1) Record flip-flop positions after retiming and replace wires connected to flip-flop by alternative wires at non-flip-flop location, (2) Replace wires with smaller slack by wires with larger slack for delay optimization. (3) Replace wires by alternative wires with less flip-flop overhead upon retiming.

申请号码

08/ENG/279

其他

Inventor(s): Professor Yu Liang David WU, Department of Computer Science and Engineering

Patent Status: US Patent Pending

国家/地区

香港